Powder Feeder

Powder Feeder

Powder feeders that are stand-alone can be added to any existing thermal spray system with up to 6 feeders. Due to the use of a Plasma or HVOF gun, hoppers with a capacity of 5L or 1.5L are available in a variety of configurations.

Our well-proven and dependable gravity wheel feeding system is designed to run quietly and without pulsating. A pulsing-free feed rate of 2g per minute is possible because of the highly precise metering mechanism. The clear sand blasting hopper makes it simple to see how much power is remaining within. When a low power level is reached, an extra sensor will alert the operator in a timely manner. Calibration of the powder feed rate is simple when used in conjunction with the PLC.

Specifications of Powder Feeders

Power220V
Feeding Speed30
Usage/ApplicationPowder Coating
Particle SizeFine
Country of OriginMade in India
Minimum Order Quantity1 Piece

Working of Powder Feeders

In terms of performance and versatility, the powder feeder is unrivaled. On the control panel, there is a huge digital display that shows powder wheel speed, maintenance, and total run time. The powder is kept warm by a set-temperature heater blanket to avoid moisture absorption, and the canister has a pressure rating of up to 90 psi / 621 kPa.

The feeder works on the basis of a constant volumetric supply. A powder carrier disc with a slotted wheel placed off-center with regard to the canister is located at the bottom of the pressurized canister. An inert carrier gas, such as nitrogen, feeds the powder into the powder hose and subsequently to the thermal spray gun when the disc rotates past the output port. The powder feed rate is proportional to the rpm of the powder disc, which is adjusted via the front panel.

Features of Powder Feeder

  • Its dual hoppers can be operated and controlled independently of each other, for processing flexibility to feed:
  • A single material using one or both hoppers
  • Two different materials simultaneously
  • Two different materials for a layered or bond coat / top coat system
  • Designed for non-stop continuous operation of same or different powders.
  • It has a digital display which ensures correct readings.
  • Remote or Local powder feed control selectable.
  • Sensor less vector control technology for accurate RPM control.
  • It is compatible with a wide range of thermal equipment such as Plasma, HVOF System and Combustion Powder flame spray gun.
  • This unit is provided with a powder pressure gauge to regulate the pressure accurately.
  • Safety Valve is provided to release high canister pressure when required.

Types Of Powder Feeder

  • Powder feeder 700 Single
  • Powder Feeder PF 700 Twin
  • Powder Feeder 3350 Single
  • Powder Feeder PF3350 Twin
powder feeder

Features of Powder Feeder – 700

  • Feed rate can be simply varied from 1 RPM up to 29 RPM.
  • This unit is provided with a powder pressure gauge to regulate the pressure accurately.
  • Safety Valve is provided to release high canister pressure when required.

Features of PF 700 Twin

  • Its dual hoppers can be operated and controlled independently of each other, for processing flexibility to feed:
  • A single material using one or both hoppers
  • Two different materials simultaneously
  • Two different materials for a layered or bond coat/topcoat system

Features of 3350 Single

  • Feed rate can be simply varied from 1 RPM up to 29 RPM.
  • Large container capacity.
  • Low wear and maintenance requirements.
  • It has a digital display which ensures correct readings
  • Remote or Local powder feed control selectable.
  • Sensor less vector control technique for accurate RPM control

Features of Powder Feeder PF3350 Twin

  • Feed rate can be simply varied from 1 RPM up to 29 RPM.
  • Large canister capacity.
  • Low wear and maintenance requirements.
  • It has a digital display which ensures correct readings
  • Remote or Local powder feed control selectable.

Powder Feeder Manufacturers in India

We are one of the best Powder Feeder Manufacturers in India and we also provide Sand Blasting Machine, Portable Shot Blasting Machine, Grit blasting machine, thermal spray gun, metalizing gun, Shot Blasting Machine in India at a low price for sale. We have the best portfolio of thermal spray guns with the best price.