Arc Spray Gun

Arc Spray Gun

Arc Spray Gun

The arc spray gun is a coating procedure in which two consumable metal wires are fed into the spray cannon separately. After that, certain wires are charged, and an arc is created between them. The incoming wire is melted by the heat of the arc, which is subsequently entrained in the gun’s air jet. With the use of compressed air, this entrained molten feedstock is dumped on a substrate.

The amount of coating that can be transferred per unit of time with an arc spray gun is a function of the method’s electrical power (amperage), as well as the wire’s frequency and melting point. Electrically conductive materials such as Aluminum, Zinc, Stainless Steel, and Copper are commonly used in the wires.

The raw material in the form of metallic wires is melted using an electric arc Spray Gun in the Metal Arc Spray Gun method. Compressed air atomizes the molten material and propels it towards the workpiece and components. The Arc Spray Process is a procedure in which the Twin Arc Spray Gun sprays Electric Arc Wire.

Twin Wire Arc Spray Gun

Twin Wire arc spray guns use two metal wires that are fed into the gun separately. An arc is created between these wires once they have been charged. The arriving metal wires are melted by the heat from the arc, and the molten metal is then entrained in an air jet from the gun. With the use of pressurised air, molten metal was deposited onto the workpiece. This method is widely used to coat an object with a thick layer of metal.

Electric Arc Spray gun

In the Electric Arc Spray gun procedure, two wires of the material with electricity going through them at the spout of spraying weapon square measure condensed with short-circuited arc, then, at that point, the melted materials square measure fine-grained and splashed onto the subjects with compacted gas. Electric Arc Spraying and fire spraying square measure together known as wire processes. All metals and amalgams in wire kind square measure out there for arc spraying material.

Among the essential warm splash cycles to be developed, the release wire shower holds its own due to the inclination toward a process for very long-time applications. Utilizing just the office of electricity, releasing wire showers requires no interaction gases besides atomizing air.

Subsequently, coatings are distinctively spotless and now and then more machinable than those delivered utilizing other warm shower processes. With an absolute bottom number of information boundaries of any warm shower process, release wire frameworks are easy to work and keep up with, yet produce truly dependable and strong covering results.

The fieriness of the arc softens the cathode wire quicker and stores particles having higher complete hotness and more noteworthy ease than the fire spraying process. The affidavit rates are from 3 to multiple times more noteworthy and consequently, the security strength is greater than 5000-7000 PSI. There is a combination moreover to the mechanical bond. The store is denser and covering strength is greater than when utilizing fire spraying.

Dry-packed gas is utilized for atomizing and driving the liquid metal. A strain of 80 psi and from 30 to 80 cu ft/min (0.85 to 2.27 cu m/min) is utilized. Practically any metal which will be brought into a wire is regularly showered. Following metals can be arc splashed: aluminum, Babbitt, metal, bronze, copper, molybdenum, Monel, nickel, chrome steel, steel, tin, and zinc wire.

arc spray gun

Arc Spray Gun Applications:

• Span decks

• Transport pipes

• Capacitors

• Welded tube creases

• Cylinder rings

• Varistors

• Evaporator dividers

• Other huge foundations

Wire Materials Compatibility All strong enemies of erosion (Zn, Zn/Al, and Al/Mg) electric arc wires accessible from us in fitting wire sizes

Wire measurements 2.3 mm, 2.5 mm

 Splash rates (2.5 mm wire)

 Zn 35 kg/h

85Zn 15Al 31 kg/h

Al 10.5 kg/h

95Al 5Mg 9.8 kg/h

Arc Spray Gun in India

Shot Blasting Machine is the Leading Manufacturer of Twin Wire arc spray gun, Electric Arc Spray Gun in India. We also provide sand blasting machine, sand blasting cabinet, shot blasting machine, abrasive blasting machine, abrasive media,  thermal spray gun, Metalizing Gun, arc spray gun for sale in India.