The sand blasting hopper is connected to a blast generator in a pressure blasting system. When a machine isn’t running, the abrasives have taken over the highest of blasting hoppers, and the blast area tank isn’t pressured. A vibrating screen is provided at the highest blasting hopper to sift the abrasive poured at the top of the sand blasting hopper. When the mushroom plug is removed, abrasive material will be able to enter the blasting tank of the sand blasting hopper for blasting application. When the mushroom plug rises, the compressed gas is turned on, and the abrasive area tank is pressured, allowing the abrasive to fall freely into the blending tube.
The abrasive media is continually transported from the mixing tube to the Sand Blasting nozzle for blasting by compressed gas. The sand blasting equipment ON/OFF remote controller is in the operator’s hands and does not require an electrical connection.
The dead man handle is applied to the operator’s hand when it wants to be on and off then operators can start and stop this little sandblasting Hopper in an automatic On/Off modern sand blasting hopper. The pressure vessel sandblaster is lightweight and portable. Cleaning, rust removal, and corrosion removal are all done with a conveyable sandblasting hopper. The industry’s portable sand blasting machine is utilized for cleaning, rust removal, and corrosion replacement in India.
Sand Blasting Hopper is a portable sand blasting machine located for the surface treatment the most commonplace and most fulfilling answer is for the small thing and for the use inside the open and for the now not specify the product.
Contents
Main Components of Sand Blasting hopper
• Air Filter
• Mushroom Ball
• Net Realizable Valve (NRV)
• Remote Control
• Pinch Valve
• Mixing Tube
• Blasting Holes
• Sand Blasting Nozzle
AIR FILTER- prevents impurities together with moisture and so forth. From the air compressor.
MUSHROOM BALL- used for growing the stress within the hopper.
NET REALIZABLE VALVE- used for managing the quantity of air supply and additionally prevents air to head returned.
REMOTE CONTROL- used for on/off the delivery of air.
PINCH VALVE- is a two-way valve designed to shut off or control the glide of abrasive.
MIXING TUBE- where the blending of air and abrasive takes region.
BLASTING HOLES- from which the hose pipe is connecting.
SAND BLASTING NOZZLE- Sand blasting nozzle is a tool that hastens air and abrasive blasting mixture over a cloth’s floor that exhibits pitting and wishes restore and subsequent safety from corrosion.
Type of Sand Blasting Hopper
- STI P7 150
- STI P7 300
- STI P7 500
- STI P7 1000
Sand Blasting Hopper STI P7 150
P7 150 sand blasting hopper is the smallest model in the sand blasting system on this version the ability of the machine for the sand is approx 65 kg and the run time of the device is 20 to twenty-five mint and extent of the gadget is forty-two later on the pinnacle of the gadget wire mesh is furnished for the separate the cloth and the blasting hose is used approximately the 19mm and the cfm is required for the operation the device is 55 cfm and required compressor 15 H.P.
Sand Blasting Hopper STI P7 300
sand blasting hopper P7 300 is the medium version in the sand blasting machine on this model the ability of the device for the sand is approx a hundred thirty kg and the run time of the system is 30 to 35 mint and quantity of the machine is 84 later at the top of the gadget twine mesh is furnished for the separate the material and the blasting hose is use about the 19mm and the cfm is needed for the perform the device is eighty five cfm and required compressor 20 H.P.
Sand Blasting Hopper STI P7 500
sand blasting hopper P7 500 is the medium model in the sand blasting machine on this model the ability of the machine for the sand is approx 260 kg and the run time of the device is forty to 45 mint and quantity of the gadget is a hundred and sixty later at the pinnacle of the gadget wire mesh is furnished for the separate the fabric and the blasting hose is located approximately the 19mm and the cfm is needed for the function the device is 113 cfm and required compressor 25 H.P.
Sand Blasting Hopper STI P7 1000
sand blasting hopper P7 1000 is the largest model inside the sand blasting machine in this model the capacity of the gadget for the sand is approx. 460 kg and the run time of the gadget is forty-five to 60 mint and quantity of the machine is 284 later at the pinnacle of the device cord mesh is furnished for the separate the material and the blasting hose is found about the 32mm and the cfm is required for the operation the device is 217 cfm and required compressor 30 H.P.
Specification of Sand Blasting Hopper
| Model | STI P7 150 | STI P7 300 | STI P7 500 | STI P7 1000 |
| Material | Metallic | Metallic | Metallic | Metallic |
| Height | 1111mm | 1291mm | 1321mm | 1611mm |
| Diameter | 361mm | 461mm | 621mm | 761mm |
| Volume | 42Ltrs. | 85Ltrs | 142Ltrs | 284Ltrs |
| Blast Nozzle Orifice | 5/6mm | 6/mm | 6/8mm | 9.5mm |
| Compressed air req. at 80 psi | 60Cfm | 85Cfm | 113Cfm | 217Cfm |
Sand Blasting Hopper price
Sand Blasting hopper price depends on the size of abrasive tank and type sand blasting hopper in India. We also provide all cabinets and portable type sand blasting machine in India at a low price for sale.
Sand Blasting Hopper for sale
Shot Blasting Machine is the leading Manufacturer of Sand Blasting hopper for sale in India at low price for sale. We are also the manufacturer of sand blasting machine, shot blasting machine, sand blasting cabinet, shot blasting room, grit blasting machine, sand blasting helmet, thermal spray gun, arc spray gun, abrasive media, etc in India.
