Carbon Steel cut wire shots are very aggressive shots that affect more as compared to other cut wire shots. It’s made up of carbon and mixed with steel alloys and wire length is cut to its diameter. Carbon steel cut wire shots are used for Carbon cut wire shots are soft it’s suitable for operation in deburring the die casting, removal of paint, dust and sand particle loose particles and coating and heat softness and a thin film of carbon cut wire shots on workpieces or object which provide corrosion on the resistance. High cut wire shots are also used for Surface finishing, grit blasting, shot blasting machine, shot peening machine, grit removal, pre-treatment, rust removal, and blast cleaning.
There are two types of carbon steel cut wire shots as mentioned below:-
- High carbon cut wire shots
- Low carbon cut wire shots
Contents
Types of Carbon Steel Cut Wire Shots
Mainly there are 2 types of carbon cut wire shots:
- High Carbon Steel Cut Wire Shot
- Low Carbon Steel Cut Wire Shot
High Carbon Cut Wire Shots
High Carbon Steel Cut Wire Shot are utilized for shot peening as an accuracy apparatus. High carbon cut wire is produced using up carbon steel wire of chosen measurement and rigidity through unique cutting machines. It is the initial phase of molded cut wire pellets and satisfies the particular. It comprises over 0.60% carbon, along these lines changing its actual properties.
High carbon is otherwise called carbon instrument steel, it has around 0.61% to 1.5% carbon. With a high carbon content, high-carbon cut wire steel is more grounded and harder, however less flexible than low-carbon and medium-carbon steel.
Note that a wide range of steel, including low-carbon, medium carbon, and high-carbon, contain something beyond iron and carbon. While steel is described by these two principal components. It commonly contains the following measures of different components. For instance, it’s normal for steel to contain the following measures of chromium or nickel.
Low-carbon steel comprises under 0.30% carbon. Medium-carbon steel comprises 0.30% to 0.60% carbon. Also, high-carbon steel contains over 0.60% carbon. As the carbon content of steel builds, it becomes more grounded and harder. Simultaneously, it likewise turns out to be less pliable.
Low Carbon Cut Wire Shots
Low carbon steel cut wire is utilized in sand blasting the utilization of low carbon is for covering on sand impacted material like train blocks, stone, cooler, tanks, etc. Low carbon is useful for sand blasting and expulsion of covering from the workpiece. The low carbon steel cut wire is utilized for sand blasting first and afterward, it is utilized for covering through warm splash firearm.
Low-carbon shots are a normal quality wire, and it is called a universally useful wire. Steel wire generally holds its shape, however, this is an enormous component, and twists it without any problem. Frequently utilized for an assortment of frameworks. Low-carbon steel cut wire is characterized by a low proportion of carbon to press.
By means of depiction, low-carbon steel cut wire comprises under 0.30% of carbon. Likewise comprehended as gentle steel, it costs less to deliver than both medium-carbon steel and high-carbon steel. Notwithstanding its low expense, low-carbon steel is more adaptable, which might improve or better its adequacy for specific applications while lowering its viability for different applications.
Gentle steel (iron including a little level of carbon, solid and strong yet not promptly tempered), otherwise called normal carbon steel and low-carbon steel cut wire, is currently the most well-known type of steel since its cost is nearly low while it gives material properties that are adequate for some applications. Gentle steel contains around 0.05–0.30% carbon making it flexible and bendable. Gentle steel has moderately exceptionally low rigidity, however, it is reasonable and simple to frame; surface hardness can be worked on through carburizing.
Specifications of Carbon Steel Cut Wire Shot
| Shape | Sphere/Ellipsoid/Spheroid |
| Size | 2.50mm, 3.00mm |
| Hardness | 55 to 62 HRC |
| Ductile Intensity | 1750-2150 mpa |
| Density | 7.8 g/cm |
| Microhardness | 51-53 HRC(525~561HV) |
Physical Properties:
| Sizes | 0.4mm – 1.1mm |
| Density | 8.9g/cm 3D square |
| Microhardness | 110’300 hv |
| Pliable power | 200’500 mpa |
| Toughness | Multiple times |
Chemical Composition
Carbon : 0.45-0.70%
Mn : 0.30-1.30%
Si : 0.15-0.35%
S : <=0.05%
S :<=0.04%
Fe : Remaining
Carbon Cut Wire Shot Price in India
Carbon cut wire shots price in India is affected by numerous factors like size of shots required, type, etc. Soft Type it’s suitable for operation in deburring the die casting, removal of paint, dust, and sand particle loose particles and coating and heat softness and a thin film of carbon cut wire shots on workpieces or object which provide corrosion on the resistance. High-cut wire shots are also used for Surface finishing, shot blasting, grit blasting, pre-treatment, rust removal, blast cleaning, and shot peening machine.
Carbon Cut Wire Shots Supplier
We are a prominent carbon cut wire shot supplier in northern India. In applications where huge cross-areas are utilized to limit redirection, disappointment by yield isn’t a hazard so low-carbon steels are the most ideal decision, for instance as key steel. The density of gentle steel is roughly 7.85 g/cm3 (7850 kg/m3 or 0.284 lb/in3) and Young’s modulus is 200 GPa (29,000 ksi).
Low-carbon steels show yield-point runout any place the texture has 2 yield focuses. The essential yield reason (or higher yield intention) is on top of the second and consequently, the yield drops drastically when the higher yield point. In the event that delicate cast steel is just anxious to some reason between the higher and lower yield reason then the surface creates Lüder bands. Low-carbon steels contain less carbon than various steels and region units simpler to cold-structure, making them simpler to deal with Typical uses of low steel region unit car components, lines, development, and food jars.
High-tractable steels are low-carbon, or steels at the lower end of the medium-carbon range, which have extra alloying fixings to expand their solidarity, wear properties, or explicitly rigidity. These alloying fixings incorporate chromium, molybdenum, silicon, manganese, nickel, and vanadium. Debasements, for example, phosphorus and sulfur have their greatest allowable substance confined. On the basis of the above factors, we can say that we are the best carbon cut wire shots supplier, exporter, and manufacturer in western Rajasthan.
Low Carbon cut wire shots are soft. It’s suitable for operation in deburring the die casting, removal of paint, dust and sand particle loose particles and coating and heat softness and a thin film of low carbon cut wire shots on workpieces or objects which provide corrosion on the resistance. We also provide abrasive media such as garnet sand, copper slag, aluminum oxide, steel grit, and many more at a low and effective price for sand blasting used in sand blasting machine.